ZyXEL Communications Corporation WRE2205 Manual Do Utilizador

 Chapter 3 Connection Wizard

WRE2205 User’s Guide

Wizard Step 2: Selecting an AP

The following table describes the labels in this screen.

Network > Wireless LAN > AP Select

Select

Use the radio button to select the wireless device to which you want to connect. 

SSID

This displays the Service Set IDentity of the wireless device. The SSID is a unique name 
that identifies a wireless network. All devices in a wireless network must use the same 
SSID.

MAC

This displays the MAC address of the wireless device.

Channel 

This displays the channel number used by this wireless device.

Mode

This displays which IEEE 802.11b/g/n wireless networking standards the wireless device 
supports.

Security Mode

This displays the type of security configured on the wireless device. When no is shown, no 
security is configured and you can connect to it without a password.

Strength

This displays the strength of the wireless signal. The signal strength mainly depends on 
the antenna output power and the distance between your WRE2205 and this device.

Setup repeater 
manually

Select this to setup the AP manually.

SSID

If Setup repeater manually is selected, use this field to type the SSID of the AP. This is 
useful when the AP’s SSID is hidden.

Refresh

Click this to search for available wireless devices within transmission range and update 
this table.