ZyXEL Communications Corporation WRE2205 Manual Do Utilizador

 Chapter 6 Wireless LAN

WRE2205 User’s Guide

Network > Wireless LAN > WPS

The following table describes the labels in this screen.

Use this screen when you want to add a wireless station using WPS. To open this screen, click 
Network > Wireless LAN > WPS Station tab.

Note: Note: After you click Push Button on this screen, you have to press a similar 

button in the wireless station utility within 2 minutes. To add the second wireless 

station, you have to press these buttons on both device and the wireless station 

again after the first 2 minutes.

Network > Wireless LAN > WPS

WPS Setup

Enable WPS

Select this to enable the WPS feature.

PIN Number

This displays a PIN number last time system generated. Click Generate to generate a 
new PIN number.

WPS Status

Status

This displays Configured when the WRE2205 has connected to a wireless network using 
WPS or when Enable WPS is selected and wireless or wireless security settings have 
been changed. The current wireless and wireless security settings also appear in the 
screen.

This displays Unconfigured if WPS is disabled and there are no wireless or wireless 
security changes on the WRE2205 or you click Release_Configuration to remove the 
configured wireless and wireless security settings.

Release 
Configuration

This button is only available when the WPS status displays Configured.

Click this button to remove all configured wireless and wireless security settings for WPS 
connections on the WRE2205.

Apply

Click Apply to save your changes back to the WRE2205.

Refresh

Click Refresh to get this screen information afresh.