ZyXEL Communications Corporation WRE6505 Manual Do Utilizador
Chapter 11 System
WRE6505 User’s Guide
70
If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default WRE6505 IP address (192.168.1.2). Refer
to your operating system’s help files for details on how to set up your computer’s IP address.
computer to be in the same subnet as that of the default WRE6505 IP address (192.168.1.2). Refer
to your operating system’s help files for details on how to set up your computer’s IP address.
11.6.3 Restore to Factory Defaults
Pressing the WPS button (see
) on the front panel for more than 10 seconds
resets the factory defaults of your WRE6505. Refer to
for more information
on the resetting the WRE6505.
11.7 Language
Click Maintenance > Language to select the language for use in the user interface.
Figure 58
Maintenance > Language
The following table describes the labels in this menu.
11.8 System Mode
For further information on System Mode see
.
Table 30
Maintenance > Language
LABEL
DESCRIPTION
Language
selection
selection
Click the drop-down menu to select the display language.
Apply
Click Apply to save your changes back to the WRE6505.
Cancel
Click Cancel to reload the previous configuration for this screen.