L3 Technologies AISA1 Manual Do Utilizador
Marine Systems
Aviation Recorders
Initial Issue
Dec. 01/06
165M0014-10
Page 2–29
Page 2–29
2.1.4.16 Set AIS Channels
This menu page allows the administrator to set the default, Open Seas, transmit and
receive frequencies as well as the operating power level.
receive frequencies as well as the operating power level.
AIS Channel A:
2087 should be default (Channel 87B, 161.975 MHz)
AIS Channel B:
2088 should be default (Channel 88B, 162.025 MHz)
Power Level: Hi = high power, Lo = low power
To enter System Information and Configuration information, perform the fol-
lowing:
lowing:
(1) Press the FNC key, press the NAV key. The AIS Main System Menu screen will
appear.
(2) Using the down Arrow key, select Set AIS Channels, and press the ENT key.
The AIS Channel Setup screen will appear. (Refer to Figure 2–20.)
(3) Using all of the arrow keys, highlight an entry point, and press the ENT key.
(4) Enter the data, press the ENT key, and move to the next data entry point.
(5) Press the ESC key to return to the AIS Main System Menu screen.
Figure 2–20. AIS Channel Setup Screen