Motorola Mobility LLC T6CR1 Manual Do Utilizador

MOTOROLA INC      

 

 

 

 

 

FCC ID: IHDT6CT1 

 

 

1.  GENERAL:  
 
 

The Bluetooth Module BT02 facilitates a wireless Bluetooth interface between a 

wireless handset and other Bluetooth-enabled devices.  The Bluetooth Module BT02 is 
assembled internally to a Motorola Telematics Control Unit, which is a finished product 
supplied to the automotive market.  The Bluetooth Module BT02 should be considered a 
module. 
 
2.  ANTENNA AND MODULE INSTALLATION: 
 

The module utilizes an external antenna through a pc board mounted connector 

that is unique to this application.  The external antenna used in this application is a BMW 
supplied antenna, BMW part number 6 928 461.  The unit is designed for installation 
within the Telematics Control Unit and located in an automobile, usually in the trunk 
area.  The device is mounted within a metal housing.  Due to the low power at which the 
unit transmits (0.0025 W max.), placement from an SAR perspective is not critical.   
 

No end-user installation is involved of the Bluetooth module and is only 

performed by Motorola or approved contractor.  Any unauthorized changes or 
modifications not expressly approved by Motorola could void the user’s authority to 
operate this equipment.   
 
 
3.  I/O CONNECTION: 
 
 

A board mounted 22-pin female connector is utilized to provide power and 

vehicle bus communications to the module.  This connector will only mate with a 
corresponding connector in the Telematics Control Unit.. 
 
4.  SPECIFICATIONS: 
 

•  Frequency range:   

2402 MHz – 2480 MHz 

 
•  Operating current:  

1.5A nominal 

 
•  Operating voltage:  

13.2V nominal 

 

 

•  Operating temp. range:  -30°C to +70°C 
 
•  Storage temp. range: 

-40

°C to +85°C 

 
•  Output power: 

 

0.0025 W max