Motorola Mobility LLC T6CT1 Manual Do Utilizador

MOTOROLA INC      

 

 

 

 

 

FCC ID: IHDT6CT1 

 

 

1.  GENERAL:  
 
 

The Bluetooth Module BT04 facilitates a wireless Bluetooth interface between a 

wireless handset and another Bluetooth-enabled device located in a Telematics control 
unit.  The Bluetooth Module BT04 is internal to a Motorola Bluetooth handset should be 
considered a product level module. 
 
2.  ANTENNA AND MODULE INSTALLATION: 
 

The module utilizes an internal, pc board mounted, chip antenna.  The unit is 

designed for installation within the Bluetooth handset and located in an automobile, 
usually in the center console area.  The device is mounted within a plastic housing of the 
handset and is located to minimize shadowing of the internal antenna.  Due to the low 
power at which the unit transmits (35uW radiated measurement.), placement from an 
SAR perspective is not critical.   
 

No end-user installation is involved of the Bluetooth module and is only 

performed by Motorola or approved contractor.  Any unauthorized changes or 
modifications not expressly approved by Motorola could void the user’s authority to 
operate this equipment.   
 
 
3.  I/O CONNECTION: 
 
 

A board mounted, 16-pin flex cable is utilized to provide power and vehicle bus 

communications to the module.  This connector will only mate with a corresponding 
connector in the Bluetooth wireless handset. 
 
 
4.  SPECIFICATIONS: 
 

•  Frequency range:   

2402 MHz – 2480 MHz 

 
•  Operating current:  

1.5A nominal 

 
•  Operating voltage:  

13.2V nominal 

 

 

•  Operating temp. range:  -30°C to +70°C 
 
•  Storage temp. range: 

-40

°C to +85°C 

 
•  Output power: 

 

35uW (Radiated Measurement)