Scosche Industries BT1200 Manual Do Utilizador

•  Electronics Box
•  Keypad Control
•  Microphone
•  Power / Speaker / Mute (ISO harness)
•  Low-level connection harness
•  Instruction manual
•  Hardware bag

BEFORE BEGINNING

Check all vehicle manufacturer cautions and warnings regarding electrical service (AIR BAGS, ABS
BRAKES, ENGINE/BODY COMPUTER AND BATTERY).

PLAN OUT YOUR INSTALLATION

You should pre-determine the location of the microphone, keypad controller and electronics box. This
will save time and ease the installation process.

We recommend the use of a Volt/Ohm meter to test and locate all connections. Test lights could possibly
damage a vehicle’s computer system or cause an airbag to deploy.

DO NOT ROUTE ANY WIRING THAT MAY BECOME ENTANGLED

with the brake/gas pedals,

steering column, or any other moving parts in the vehicle.

For best performance, the BT1200 microphone must be pointed toward the direction of the driver’s
voice. We recommend choosing a location between the rear-view mirror and sun visor. The microphone
can also be mounted near the top of the A-pillar (windshield post).

Mount the BT1200 electronics box behind the stereo. Do not mount the electronics box near sources of
high heat, moisture or moving parts. Hardware is included to attach the BT1200 box to the vehicle.

The keypad is designed to easily mount in a blank switch plate, dash panel or center console. Carefully

INSTALLATION CAUTIONS & WARNINGS

©2010 SCOSCHE INDUSTRIES, INC.

300BT1200 01/10

PARTS INCLUDED