Agere Systems Nederland B.V. WLPC24H Manual Do Utilizador

22

Chapter  4

 

You move your AirPort Base Station to a location on your network with 
a different subnet and lose communication with the base station.

Because your AirPort Base Station may have an invalid IP address, do the following: 

1

Make sure that your computer is set to access the network from the same location on the 
network where you are going to move the AirPort Base Station and that it is in range of the 
base station.

2

Make sure that the computer is set to use AirPort.

3

Use the AirPort Setup Assistant to reconfigure the base station.

Additional Information

For more information on using or configuring the AirPort Base Station, see AirPort Help in 
the Help Center, available in the Help menu. There you will find information on editing base 
station settings, avoiding sources of wireless interference, locating additional information on 
the Internet, and more.

You can also find more information at the following Apple Web sites:

m The Apple AirPort Web site at www.apple.com/airport

m The Apple Support Web site at www.apple.com/support

For in-depth information configuring AirPort networks, see the “__________________” 
document on the AirPort software CD or in the AirPort folder inside the Apple Extras folder 
on your hard disk in Mac OS 9.

For wireless certification information, see the AirPort Regulatory Certification document that 
came with your AirPort Base Station.

Important  

You cannot use the Setup Assistant if you have used the AirPort Admin Utility to 

turn off Internet Sharing for your base station. If Internet Sharing is turned off, you need to 
reset your base station as described in the previous section and enter a new IP address.

LL1017.Book  Page 22  Wednesday, September 19, 2001  1:11 PM