Hobbico Inc TTX404B Manual Do Utilizador

5

WARNING!! Do NOT attempt to recharge alkaline batteries! The 
charge jack should ONLY be used if rechargeable cells are used 
in the transmitter.

The TTX404 includes a built-in charge jack for convenient recharging of NiCd or 
NiMH batteries, and is compatible with charge leads designed for Futaba

®

 brand 

transmitters. (HCAP0101) This jack is NOT compatible with charge leads for Hitec

®

, 

Airtronics

®

, JR

®

 or Spektrum

®

 radios. The dimensions for compatible charge plugs 

are as shown in the picture below.

To use the charge jack with optional rechargeable batteries, fi rst remove the sticker 
that covers the charge jack on the side of the Tx – making sure not to allow any 
object to be inserted inside the jack itself. Next, insert the cells inside the Tx’s battery 
compartment noting proper polarity. Make sure the transmitter’s power switch is in 
the OFF position. Connect a compatible charge lead to the jack and follow the 
instructions included with the charger for charging of NiCd or NiMH batteries that 
are rated at 4.8V. 

Tactic’s optional TACP1000 rechargeable battery and wall charger kit includes eight 
“AA” size rechargeable NiMH cells and 110V AC wall charger, which is compatible 
with this Tx and can be found at local retailers. Make sure to follow the instructions 
included with the charge kit.

WARNING!! It’s not recommended to charge batteries at greater 
than 1 amp through this charge jack. Fast charging of NiCd and 
NiMH batteries should ONLY be done with chargers that are 
specifi cally designed to include the peak-detection function