Anchor Audio WM-900 Manual Do Utilizador

Thank you for choosing an Anchor Audio intercom system.  Our products incorporate state-of-the-art 
design and the finest quality of materials and workmanship.  We’re proud of our products and appre-
ciate the confidence which you have shown by selecting an Anchor system.
I hope you’ll take a few minutes to review this manual.  We’ve incorporated several unique features 
into our products, and your knowledge of how to use them will enhance the performance and your 
enjoyment of the system.

Janet Jacobs – President
on behalf of all Anchor Employees

Portable Sound Systems  •  Torrance, California

100-0165-000/A - 10/07

Range (line of sight) 

1,500’ / 450 m

FCC License 

User Registration

Selectable Wireless Groups 

4

Selectable Wired Channels 

2

Frequency 

944 – 952 MHz

Frequency Settings 

4 per Group

Output Power 

8 dBm

DC Requirements 

9V – 0.5A

Interface Connector 

3-pin female XLR

Antenna 

1/2 wave length dipole

Antenna Length 

7.2” / 182 mm

Dimensions 

8.5 x 4.5 x 1.7 in / 21.6 x 11.4 x 4.32 cm

Weight 

2.4lbs / 1.1kg

(Specifications subject to change without notice)

Please check your new unit carefully for any damage which 
may have occurred during shipment.  Each Anchor product 
is carefully inspected at the factory and packed in specially 
designed boxes for safe transport.
Notify the freight carrier immediately of any damage to the 
shipping box or product.  Repack the unit in the original box 
and wait for inspection by the carrier’s claim agent.  Notify 
your dealer of the pending freight claim.

RETURNING SYSTEMS FOR SERVICE OR REPAIR
For service or repair, please contact the dealer you purchased 
your system from or Anchor Audio Customer Service at (888) 
444-6077 to obtain a RA 

(Return Authorization) number.  All 

shipments to Anchor Audio must include an RA number and 
must be shipped prepaid. C.O.D. shipments will be refused 
and returned at your expense.

WARRANTY REGISTRATION
Visit our website at www.anchoraudio.com and select “War-
ranty Registration”.  Complete the online form to activate the 
two-year limited warranty on your WingMAN.

Switch your belt pack settings to a different AnchorMAN 
USER GROUP:  A, B, C or D.

Reduce the headset microphone sensitivity level.  Adjust the 
AnchorMAN mic sensitivity with the +/– Microphone but-
tons on the belt pack.

Your rechargeable batteries may be running low.  If batteries 
are weak, the Group LED’s will slowly flash.  Your belt pack 
needs to be recharged.  If you need to keep working, you can 
use disposable alkaline batteries.

WingMAN is an interface station that allows full duplex com-
munication between AnchorMAN belt packs and unbalanced 
party-line intercom systems.  Use proper intercom etiquette 
– wait to break into the conversation network until the other 
system users have stopped speaking.