GIGA-BYTE TECHNOLOGY CO. LTD. GN-BR02G Manual Do Utilizador

GN-BR02G 2.4GHz Wireless Broadband Router 

10 

 

 

 
C. 

You are now connected to the Router and SmartSetup will detect 
your ISP type.    If you do not see the menu shown below, click the 
Smart Setup button in the upper left of the main menu.   

 

After SmartSetup detects your Internet connection, it will report the 
connection it finds. The possible options are:     

• PPPoE 

• Dynamic 

IP 

• Static 

IP 

 

 

If your connection is not detected automatically, simply press           
the “Smart Setup” button on the menu panel to activate it. 

 
   

PPPoE Internet Connection Type 
If you have a PPPoE type connection, the following screen shown 
below will appear prompting you to enter the ISP User Name and 
Password.  

 

 

Note that you only have to enter the ISP information during 
initial setup only.   

 
Dynamic IP Internet Connection Type 
If you are connecting through a Dynamic IP address, no ISP login 
information is required. Just click the OK to allow the router to save 
the Dynamic IP settings and the Router will reboot, brining you to the 
Utility Main Page. 

 
 

Static IP Internet Connection Type 
If you have a Static IP address, the following screen show below will 
appear prompting you to enter your WAN IP address, WAN subnet 
mask, WAN gateway, and DSN information.    This information is 
provided by your ISP.