Intercontinental Technologies Ltd F22-24E0032 Manual Do Utilizador
Intercontinental Technologies, Ltd.
Chapter 4
Page 11 of 87
Chapter 4
Operation of the F22 Series Industrial Radio Remote
Controller
Controller
Note: Operating industrial equipment can be hazardous.
Use TELECRANE equipment only in accordance with the
directions specified in this manual and follow all safety
guidelines. Only trained personnel should use TELECRANE
equipment.
directions specified in this manual and follow all safety
guidelines. Only trained personnel should use TELECRANE
equipment.
4.1 Normal Operation of the Handheld and Joystick Models
The F22 Series Industrial Radio Remote Controls offer flexibility for a variety of applications and
functions that can be specified and set at the factory. The system consists of a receiver and two
transmitters, and uses a series of pushbuttons and other controls to operate a crane or industrial
equipment. This chapter describes the general operation of the TELECRANE system, and provides
specific information related to both the handheld and joystick models.
4.1.1 Pre-Operational Checks
Before you operate this product, perform the following checks to ensure that the unit is in proper
working order:
Periodically inspect the limit switches on the crane and ensure that they actuate correctly and stop
the motion they control.
Inspect the position and location of the equipment to ensure that the transmitter and receiver are not
exposed to a damaging environment such as high temperatures or high impact.
4.1.2 Power-On Procedure
functions that can be specified and set at the factory. The system consists of a receiver and two
transmitters, and uses a series of pushbuttons and other controls to operate a crane or industrial
equipment. This chapter describes the general operation of the TELECRANE system, and provides
specific information related to both the handheld and joystick models.
4.1.1 Pre-Operational Checks
Before you operate this product, perform the following checks to ensure that the unit is in proper
working order:
Periodically inspect the limit switches on the crane and ensure that they actuate correctly and stop
the motion they control.
Inspect the position and location of the equipment to ensure that the transmitter and receiver are not
exposed to a damaging environment such as high temperatures or high impact.
4.1.2 Power-On Procedure
Inspect the transmitter and receiver at the start of each work
day to ensure safe operation of this product.
Note: If the password feature has been enabled, follow the Power-On procedure described in Section
4.2.1. (Password feature available only on handheld models).
To turn on the transmitter:
1. Retrieve the green Rotary Key and place it in the transmitter.
2. Disable the Emergency Stop by turning the red EMS button clockwise until it pops out, then
releasing.
3. Turn the green Rotary Key Switch clockwise past “ON” to the “START” position, note the LED
color, then release. The switch will spring back to the ON position and a tone will sound. The
transmitter is now active.
transmitter is now active.