Intercontinental Technologies Ltd F22-6D Manual Do Utilizador
Intercontinental Technologies, Ltd.
Chapter 7
Page 21 of 87
Part 2: Technician’s Manual
Chapter 7
Safe Installation
Emergency Procedure
In case of emergency, perform these steps IN ORDER:
1. Press the Red STOP Button.
2. Turn the Green Rotary Key Switch to the OFF position and remove the key from
2. Turn the Green Rotary Key Switch to the OFF position and remove the key from
the transmitter.
3. Switch off the main power to the crane.
4. Contact your distributor or installer.
4. Contact your distributor or installer.
NOTE: Read ALL safety information before you install or operate
this product.
7.1 Emergency
Procedures
If the F22 unit detects an error or system fault, it will issue an emergency STOP command and
deactivate all systems programmed for a STOP command. It is therefore important to install the F22
system correctly so that if it detects a fault, it can perform an emergency stop and the crane will shut
down safely.
deactivate all systems programmed for a STOP command. It is therefore important to install the F22
system correctly so that if it detects a fault, it can perform an emergency stop and the crane will shut
down safely.
7.2 General Safety Information
In an industrial environment, safety must always be a top priority. Persons responsible for
installation, operation, and maintenance must make certain that both their actions and the equipment
on which they work are safe. This chapter includes a list of safety rules that must be followed when
working with TELECRANE products, as well as cranes in general. This list is not intended to be all-
inclusive. General industrial safety rules must always be followed. If there is any doubt about how to
proceed, always take the safest course of action.
installation, operation, and maintenance must make certain that both their actions and the equipment
on which they work are safe. This chapter includes a list of safety rules that must be followed when
working with TELECRANE products, as well as cranes in general. This list is not intended to be all-
inclusive. General industrial safety rules must always be followed. If there is any doubt about how to
proceed, always take the safest course of action.
7.3 Installation
Safety
• Before installing or operating this product, read this manual thoroughly. If you have any
questions, please contact ITL.
• Only qualified personnel who are familiar with the product and who have read these safety
instructions should install TELECRANE products.
• All sources of power to the crane or controlled equipment must be de-energized and applicable
lockout/tag out procedures executed before installing the unit.
• Before installing the receiver, energize it in a controlled environment (for example, an office)
where it can be tested and set up properly before it is mounted in the field.