HID Global Corporation SE3200 Manual Do Utilizador
iCLASS SE Reader Module Hardware Developer Guide, SE3200-902, Rev B.0
October 2012
Page 25 of 42
HID GLOBAL CONFIDENTIAL AND PROPRIETARY INFORMATION. Use and disclosure of this information is strictly
restricted by the terms of the end user license agreement with HID Global Corporation. If you have received this information
and are not an intended recipient or are not subject to or do not agree to be bound by the terms of the non-disclosure
agreement, please immediately return this document to HID Global Corporation, 15370 Barranca Pkwy, Irvine, CA 92618-3106.
6
RF Interfaces
Depending on the configuration, the iCLASS SE Reader Module offers up to two different RF
interfaces.
•
HF interface for 13.56 MHz transponders
•
Prox interface for 125 kHz transponders (SE32x0APx only)
6.1
HF Interface (13.56 MHz)
The HF interface is optimized for operation with 50Ω tuned antennas.
Figure 7: HF Interface
The impedance of 50Ω allows for integrated antennas, as well as remote antennas
The impedance of 50Ω allows for integrated antennas, as well as remote antennas
connected through a coax cable. Use a coaxial connection whenever operating the module in
Normal Power Mode, if possible.
SIO Reader Board
P401
Tuning
Network
Antenna
Pin1-ATX
Pin2-GND
50 Ohm
Coax Cable
Figure 8: HF Interface with Coax Cable