Colorado Time Systems Inc 0005 Manual Do Utilizador
JP2
Wireless
The R-0066-5370 operates in the 902-928MHz band. The device channel output
is configurable with 32 discrete channels, with a .75MHz jumps between channels.
Channels are configurable from the RS232 port and the SPI port.
Antenna
Channels are configurable from the RS232 port and the SPI port.
Antenna
The device has been tested for compliance with the following antennas:
- Linx Technologies ANT-916-CW-HWR-RPS
- Linx Technologies ANT-916-CW-RH
- Linx Technologies ANT-916-CW-HWR-RPS
- Linx Technologies ANT-916-CW-RH
The connector is a RPSMA header for connection to the antenna. An extension cable is
permitted with the ANT-CW-HWR-RPS antenna, but no others.
FCC Compliance
permitted with the ANT-CW-HWR-RPS antenna, but no others.
FCC Compliance
For compliance with the FCC requirements, the following statements must be
included in the end device’s user manual. The device must also be clearly marked as
containing this device.
-
containing this device.
-
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
- This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
Once this device is installed into the end device, the final device must be further tested by an FCC
approved laboratory for intentional radiation.
- This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
Once this device is installed into the end device, the final device must be further tested by an FCC
approved laboratory for intentional radiation.
1
Ground
2
Slave Select (SPI)
3
MISO
4
MOSI
5
SPI Clock
6
IIC_SCL
7
IIC_SDA
8
SCI_RX
9
SCI_TX
10
Ground