KAPSCH TRAFFICCOM CANADA INC. 802295 Manual Do Utilizador
_
JANUS
®
Multi-Protocol Reader Ver. 2: Maintenance Instructions
Confidential
UM
360450-210: A7
Page 229 of 282
© Kapsch TrafficCom Canada Inc. 2013
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict
confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or
used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 OPERATIONS AND MAINTENANCE MANUAL.DOCX
10/31/2013 7:56
Kapsch TrafficCom
2. Click the
General tab.
Result: The following screen appears.
3. Select the Switchover on Ethernet IRIF Link Down check box.
4. From the
Lane assignment tab on the Configuration page, enter an IRIF timeout, in milliseconds, in the
IRIF text box.
Result: The Reader now continuously checks the IRIF link and switches over whenever a downed Ethernet
Result: The Reader now continuously checks the IRIF link and switches over whenever a downed Ethernet
IRIF link is detected.
To configure the Reader to switchover based on Test tag feedback (if present)
Note: Test tags are used to continuously check and confirm the operation of IAG 1 and IAG 2
Note: Test tags are used to continuously check and confirm the operation of IAG 1 and IAG 2
antennas only.
1. Select the
Configuration link on the left side panel.
Result: The following screen appears.