Trimble Inc. 6734890 Manual Do Utilizador
Glossary
13
67384
7-pin Lemo
Cable with DC plug
Power to host devices
from AC adapter
from AC adapter
Serial to serial for Moving
Base applications
Base applications
57167
26-pin
Adapter with DC
plug
plug
Power from AC adapter
USB(B) socket and Ethernet
socket
socket
57168
26-pin
Adapter with DC
plug
plug
Power from AC adapter
Serial and Ethernet socket
60789-00,
77070-00
77070-00
26-pin
Cable with DC plug Power from AC adapter
2 x Serial, Ethernet plug,
USB(A) plug, 1PPS (BNC)
USB(A) plug, 1PPS (BNC)
65791-00,
78235-00
78235-00
26-pin
Cable with DC plug Power from AC adapter
2 x Serial, Ethernet socket
Note – SPS852 low voltage cut-offs:
Power applied through the Lemo connector models a standard 12.4 V lead acid battery. Shut-down
voltage is temperature-compensated and is designed to prolong the life of a lead acid battery and not
place it into a deep discharge state.
voltage is temperature-compensated and is designed to prolong the life of a lead acid battery and not
place it into a deep discharge state.
Power applied through the 26-pin adaptor cable models a standard 11.1 V lithium-ion battery. Shut-
down voltage is temperature-compensated and is designed to prolong the life of a lithium-ion battery.
down voltage is temperature-compensated and is designed to prolong the life of a lithium-ion battery.
The external DC voltage supply can be used by the receiver if it is in the range stated by the label on
the receiver.
the receiver.
Connecting SPS receivers to a vehicle battery
WARNING – Use caution when connecting battery cable's clip leads to a vehicle battery. Do not allow any
metal object or jewelry to connect (short) the battery's positive (+) terminal to either the negative (-) terminal
or the metal of the vehicle connected to the battery. This could result in high current, arcing, and high
temperatures, exposing the user to possible injury.
metal object or jewelry to connect (short) the battery's positive (+) terminal to either the negative (-) terminal
or the metal of the vehicle connected to the battery. This could result in high current, arcing, and high
temperatures, exposing the user to possible injury.
WARNING – When connecting an external battery, such as a vehicle battery, to an SPS receiver, ensure that
you use the Trimble cable with proper over-current protection intended for this purpose, to avoid a safety
hazard to the user or damage to the product.
you use the Trimble cable with proper over-current protection intended for this purpose, to avoid a safety
hazard to the user or damage to the product.