Trimble Inc. 8262090 Manual Do Utilizador
3
Configuration
3 0
SNRx10 Radio Modem User’s Guide
3.7
Change radio protocol
The Change radio protocol operation allows you to select the data transfer protocol
the radio will use.
the radio will use.
To select a data transfer protocol, complete the following steps:
1.
From the Operations menu, select Change radio protocol and click on Next. A
Settings Review screen similar to the following appears:
Settings Review screen similar to the following appears:
2.
Click on Finish. A progress bar appears while WinFlash attempts to connect to
the radio. When WinFlash connects to the radio, a Change Radio Protocol
dialog similar to the following appears:
the radio. When WinFlash connects to the radio, a Change Radio Protocol
dialog similar to the following appears:
3.
Select a protocol from the Change protocol to: drop down list. Available
protocols are listed in the following table.
protocols are listed in the following table.
Protocol
Band (MHz)
Description
TC/LIP (“Kea”)
450, 900,
2400
2400
Radio will receive CMRs from base station. 2-way
data is not supported.
data is not supported.
ATS
2400
Radio communicates with Trimble ATS total
stations.
stations.
SPSx30
2400
Radio communicates with Trimble SPS730 and
SPS930 UTS total stations.
SPS930 UTS total stations.
TC/LIP (“Kea” 2-way)
900
Radio will receive CMRs from base station. 2-way
data is supported.
data is supported.
IP
900
Radio will receive CMRs from Kea base station.
2-way data is supported.
2-way data is supported.
DRAFT