Trimble Inc. 613 Manual Do Utilizador
802.11g Wireless LAN+BT SiP combo Module V2.2
All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI.
Preliminary release for evaluation, Subject to be changed without Notice
9.5. PRODUCT MARKING
The Module is marked by laser marking which containing the following information:
Description:
Description:
WM-BG-XX-XX
Serial number:
yyllwkxxxx
Revision:
format to follow USI revision level in PDM System
For the serial number the following format will be followed:
yy = last two digits of current year
ll =
Assembly Location:
UT = USI Taiwan
UM = USI Mexico
UC = USI China
UT = USI Taiwan
UM = USI Mexico
UC = USI China
wk = current week (week period = starting on Monday)
xxxx = consecutive number, starting at 0000 at beginning of each week.
xxxx = consecutive number, starting at 0000 at beginning of each week.
9.6. ENVIRONMENTALLY SAFE MATERIAL RESTRICTIONS
The use of polychlorinated biphenyls (PCB’s) is prohibited (specifically) as dielectric in
capacitors or transformers.
Electrolytic capacitors shall not be composed of any quaternary salt ammonium and/or
gamma-butyrolactone (i.e. no el caps allowed).
No CFC's (chlorofluorocarbons) shall be used anywhere in the manufacture of this product.
The use of tantalum capacitors should be minimized in any product of the product family
[including the power-supply]. Where the use of tantalum caps cannot be avoided, provisions
must be made in the manufacturing process to prevent reverse polarization.
The WM-BG-MR-01 module hardware design should take the safety of operation into
consideration and prevent the potential risk on Labor safety for manufacturing process.
capacitors or transformers.
Electrolytic capacitors shall not be composed of any quaternary salt ammonium and/or
gamma-butyrolactone (i.e. no el caps allowed).
No CFC's (chlorofluorocarbons) shall be used anywhere in the manufacture of this product.
The use of tantalum capacitors should be minimized in any product of the product family
[including the power-supply]. Where the use of tantalum caps cannot be avoided, provisions
must be made in the manufacturing process to prevent reverse polarization.
The WM-BG-MR-01 module hardware design should take the safety of operation into
consideration and prevent the potential risk on Labor safety for manufacturing process.