Hughes Network Systems HNS9211 Manual Do Utilizador
Using the Hughes 211
3500988-0001 Revision 1.0
11
field “Route incoming 3.1kHz/fax calls to” “RJ14 port 1”
and simply connect the device directly to the RJ14 port with an
RJ11 cable. With this setting, all incoming calls are then
routed to RJ14 line 1. To initiate an outgoing 3.1kHz/fax call
when connected to line 1, add a 2* prefix in front of the dialed
number. For voice calls, no prefix is required, but the 9211
will accept a 1* prefix to indicate a voice call.
and simply connect the device directly to the RJ14 port with an
RJ11 cable. With this setting, all incoming calls are then
routed to RJ14 line 1. To initiate an outgoing 3.1kHz/fax call
when connected to line 1, add a 2* prefix in front of the dialed
number. For voice calls, no prefix is required, but the 9211
will accept a 1* prefix to indicate a voice call.
To dial, prefix the international number with 00 and terminate
with #. For example, to dial a number in the USA, enter:
0018005551234# (00 + Country code + phone number+ #)
with #. For example, to dial a number in the USA, enter:
0018005551234# (00 + Country code + phone number+ #)
External Antenna
The 9211 terminal has an external antenna port that can be
used to connect Class 10, Class 11 to get legacy data rates
depending upon the class of service or Class 1 active antenna
will give you HDR rates in the return direction (transmit
direction).
used to connect Class 10, Class 11 to get legacy data rates
depending upon the class of service or Class 1 active antenna
will give you HDR rates in the return direction (transmit
direction).
The existing mobile antennas for Class 10 and Class 11 can be
used with the 9211 terminal to get comms-on-the-move.
Hughes is developing a Class 1 active antenna for use with the
9211 terminal.
used with the 9211 terminal to get comms-on-the-move.
Hughes is developing a Class 1 active antenna for use with the
9211 terminal.