Hughes Network Systems HNS9350 Manual Do Utilizador
6
Hughes 9350 BGAN Terminal User Guide
•
Note
These default configurations are accessible through LaunchPad or the web MMI
and It is recommended to keep these settings for convenient operation of the
Hughes 9350 Land Mobile Terminal.
and It is recommended to keep these settings for convenient operation of the
Hughes 9350 Land Mobile Terminal.
•
P
OWER
U
P AND
C
ONNECTION TO THE
I
NTERNET
After power is applied, the Hughes-9350 Terminal and Hughes Tracking Antenna will begin their
start-up sequence. The tracking antenna will begin its search of the BGAN satellite and the
antenna motors may be heard during this time. Note that the tracking antenna must have line
of sight of the BGAN satellite. Once the antenna has locked onto the BGAN satellite, it will
continue to make minor adjustments to acquire optimum signal strength. The antenna may be
heard ‘twitching’ during this time. Eventually the antenna will sit at an optimum position while
the vehicle is stationary.
start-up sequence. The tracking antenna will begin its search of the BGAN satellite and the
antenna motors may be heard during this time. Note that the tracking antenna must have line
of sight of the BGAN satellite. Once the antenna has locked onto the BGAN satellite, it will
continue to make minor adjustments to acquire optimum signal strength. The antenna may be
heard ‘twitching’ during this time. Eventually the antenna will sit at an optimum position while
the vehicle is stationary.
Once the vehicle starts moving, the Hughes Tracking Antenna will automatically track the
satellite signal and keep the antenna pointed towards the satellite. During short outages (e.g.
while driving under a bridge, etc.) the antenna will remain in the same position and will pick up
the satellite signal immediately. For longer outages the antenna may need to repeat the search
pattern to reacquire the satellite signal.
satellite signal and keep the antenna pointed towards the satellite. During short outages (e.g.
while driving under a bridge, etc.) the antenna will remain in the same position and will pick up
the satellite signal immediately. For longer outages the antenna may need to repeat the search
pattern to reacquire the satellite signal.
Note
Circuit switched and packet switched connections will typically recover from signal
outages of less than 60 seconds. User intervention may be required to reactivate
connections for outage longer than 60 seconds.
outages of less than 60 seconds. User intervention may be required to reactivate
connections for outage longer than 60 seconds.
C
ONNECTING THE
T
ERMINAL TO THE
C
OMPUTER
You can connect your computer to the 9350 terminal with one or more of the following
interfaces
interfaces
USB
RJ-11
Ethernet
Integrated Services Digital Network (ISDN)
WLAN
Note
There is no need to check the active interface. All interfaces can be used
simultaneously to accommodate multiple users.
simultaneously to accommodate multiple users.
Note
During initial setup, the terminal can only be configured using either a USB or an
Ethernet connection. Once the terminal has been configured, all five interfaces
(USB, RJ-11, Ethernet, WLAN and ISDN) can be used for data transfer depending
on the service required.
Ethernet connection. Once the terminal has been configured, all five interfaces
(USB, RJ-11, Ethernet, WLAN and ISDN) can be used for data transfer depending
on the service required.
Your computer must be configured to support your chosen connection method.