JVC KENWOOD Corporation 378601 Manual Do Utilizador

9

Press and hold the 

 switch for approximately  second to turn the transceiver 

power ON.  Press and hold the 

 switch again to turn the transceiver OFF.

■

  If the transceiver is password protected, “PASSWORD” will appear on the 

display when the power is turned ON.  To unlock the transceiver, enter the 

correct password:
1  Select a character using the   and   keys.

•  If you are using a microphone keypad, you can enter the password by direclty 

pressing the DTMF keys instead.

2  Press the 

 key to enter the selected character.

•  This step is unnecessary when using a keypad.

3  Repeat steps  and 2 to enter the entire password.

•  Press the 

 key or microphone # key to delete an incorrectly entered character.  

Press and hold the 

 key or microphone # key to delete all characters.

4  Press the 

 key or microphone   key to confirm the entry.

•  If you enter an incorrect password, an error tone sounds and the transceiver 

remains locked.

•  The password can contain a maximum of 6 digits.

Press the keys programmed with 

Volume Up/ Volume Down to adjust the 

volume level.

Select the desired zone using the keys programmed as 

Zone Up/ Zone Down.  

Each zone contains a group of channels.
Select the desired channel/group ID using the keys programmed as 

CH/GID Up /  

CH/GID Down.  Each channel/group ID is programmed with settings for 

transmitting and receiving.
Names can be programmed for zones and channels/group IDs.  Each name can 

contain up to 4 characters.

•  You can toggle the display between the zone and channel/group ID names and number 

by pressing the key programmed as Display Format, or by accessing the Display Format 

function through the Menu {page 2}.