Radicom Research Inc WIFIHU-C-2-NE Manual Do Utilizador
Connecting the WiFiHU or WiFiHU-NE to Your System
The WiFiHU Modules are designed for easy connection to any standard USB Port and
wireless network. Connect one end of the USB cable into the USB connector on the
WiFiHU-NE and the other into any available USB receptacle on your computer. The
WiFiHU-NE’s “Hot Swap-able” interface allows you to plug or unplug the module even
when the computer is on. If using Windows, load the provided drivers. The WiFiHU-NE
is now ready for use.
If you plan to embed the WiFiHU into your system, the initial evaluation consists of the
WiFiHU USB Module mounted onto a USB hub PCB (WiFiHU-NE). To remove the
WiFiHU carefully remove it from the two 8 pin headers on the WiFiHU-NE USB
interface board. Save this interface board. The WiFiHU can always be reinstalled into the
WiFiHU-NE USB interface board and connected to any standard USB port to verify or
test the module functions. If you use external antenna, connect one end of Radicom
approved antenna to the on board socket.
6