Itron Inc. DCU5000 Manual Do Utilizador

 

 

Installing the MCLite hardware in a vehicle involves the following 
procedures: 

1.  Install the FC200 vehicle dock. See the instructions in the FC200 

Vehicle Dock User's Guide included with the MCLite installation 
package. 

2.  Set up the FC200 handheld data collector. See the instructions in 

the FC200 Getting Started Guide included with the MCLite 
installation package. 

3.  Install the MVR handheld software on the FC200. See 

“Installing the MVR Handheld Software” in the MV-RS 
Installation Guide. 

4.  Insert the FC200 into the vehicle dock. 

5.  Mount the MCLite RF unit on the passenger-side seat back. 

6.  Connect the RF unit to its power supply through the vehicle 

cigarette lighter socket. 

7.  (Optional) Connect the FC200 handheld to the RF unit, using the 

[RS-232] cable provided. 

This cable provides power to the handheld, as well as 
communications with the RF unit. If you do not use the cable to 
connect the handheld to the RF unit, the handheld will draw 
power from its internal battery and automatically use Bluetooth 
technology to communicate with the unit. 

8.  Install the RF unit's magnetic-mount antenna, using the antenna's 

magnetic roof mount and coaxial antenna cable. 

 

1.  Slide the RF unit into the vehicle mount.