Itron Inc. FNCCU4 Manual Do Utilizador
DRAFT
36
CCU4 Collector Field Installation and Service Guide
TDC-0359-000b 04/02
TDC-0359-000b 04/02
Environmental
Environmental
Power
AC Power
The CCU4 collector operates on a 120 VAC, 60 Hz supply only. The collector is double insulated
and does not require an earth ground connection.
and does not require an earth ground connection.
The collector input AC connector is a five position circular 3A/300V connector. Pins 2, 3 and 4
are voided for high voltage line to line clearance. The five position circular connector is mounted
on the collector housing, providing a watertight connection point for external power sources.
are voided for high voltage line to line clearance. The five position circular connector is mounted
on the collector housing, providing a watertight connection point for external power sources.
Table 6:
Environmental Specifications
Specification
Value
Operating Temperature, component
-40°C to +85°C (-40°F to + 185°F)
Operating Temperature, battery
-20°C to +60°C (-4°F to +140°F)
Storage Temperature
-40°C to +85°C (-40°F to + 185°F)
Humidity
Per MIL Standard 810
Solar Heat Load Exposure
?
UV Stability
?
Mechanical Vibration
Per ANSI Standard C12 Paragraph 4.7.3.20.
5-350 Hz (with a sweep time of one octave
per minute at .5 g)
5-350 Hz (with a sweep time of one octave
per minute at .5 g)
Drop Requirements
?
Salt Spray
Per ANSI Standard C12 Paragraph 4.7.3.23.
Pass 25-hour salt spray test in accordance
with ASTM B117-85
Pass 25-hour salt spray test in accordance
with ASTM B117-85
Rain Tightness
Per ANSI Standard C12 Paragraph 4.7.3.24
Weather Simulation
Test Per ANSI Standard C12 Paragraph
4.7.3.22
4.7.3.22
Table 7:
Power Specifications
Specification
Value
Voltage
96-144 VAC
Frequency
60 Hz