CALAMP WIRELESS NETWORKS INC. BDP3-CRE700 Manual Do Utilizador
120 20194-102
Paragon3 – 700/800MHz User Manual
19
4.3 IP Network Settings
4.3.1 IP Network Settings (with Host)
Referring to Figure 16 below, set the Paragon3 base station. Set the “Data” port Eth1 IP addresses (for
“Setup” port set Eth2) and IP netmask of both Base and Mobile(s).
Keep the RF IP setting as is, providing customer is not using the 10.0.0.0 IP network.
Add routes in the Host (route add…)
“Setup” port set Eth2) and IP netmask of both Base and Mobile(s).
Keep the RF IP setting as is, providing customer is not using the 10.0.0.0 IP network.
Add routes in the Host (route add…)
In the illustration, Host and PC are part of different IP subnet
Figure 16 - IP Network Settings in Router Mode (with Host)
4.3.2 IP Network Settings (with Router)
Referring to Figure 17 below, set the Paragon3 base station. Set the “Data” port Eth1 IP addresses (for
“Setup” port set Eth2) and IP netmask of both Base and Mobile(s).
“Setup” port set Eth2) and IP netmask of both Base and Mobile(s).
Figure 17 - IP Network Settings in Router Mode (with Router)
Paragon3 Base
SETUP:
Eth2 IP: 192.168.203.1
MASK: 255.255.255.0
RF IP: 10.0.0.1
MASK: 255.0.0.0
Mobile
DHCP Server
RF IP: 10.0.0.2
MASK: 255.0.0.0
Eth1 IP: 192.168.201.1
MASK: 255.255.255.0
RF Network
Host
IP: 192.168.202.2
MASK: 255.255.255.0
route add 10.0.0.0 mask 255.0.0.0 192.168.202.1
PC
DHCP Client
DATA:
Eth1 IP: 192.168.202.1
MASK: 255.255.255.0
Paragon3 Base
SETUP:
Eth1 IP: 192.168.203.1
MASK: 255.255.255.0
RF IP: 10.0.0.1
MASK: 255.0.0.0
Mobile
DHCP Server
NAT
RF IP: 10.0.0.2
MASK: 255.0.0.0
Eth1 IP: 192.168.201.1
MASK: 255.255.255.0
RF Network
Router
IP: 192.168.202.2
MASK: 255.255.255.0
route add 10.0.0.0 mask 255.0.0.0 192.168.202.1
PC
DHCP Client
DATA:
Eth1 IP: 192.168.202.1
MASK: 255.255.255.0
Default Gateway:
192.168.202.2
Host