CALAMP WIRELESS NETWORKS INC. GPDB Manual Do Utilizador

Página de 23
122 20130-003
G3 Installation Guide
10
2.2 Warnings
Before starting installation, review all of the following warnings.
2.2.1  RF Radiation warning
Recommended safety guidelines for the human exposure to radio frequency electromagnetic energy are
contained in the Canadian Safety Code 6 and the Federal Communications Commission (FCC) Bulletin
65. Proper installation of the transceiver antenna of G3 as summarized in section 2.5 will result in user
exposure substantially below the recommended limits for the general public.
Qualified personnel must do all antenna installations. See paragraph 2.5.2 for recommended antenna
positioning.
Transmissions when persons or animals outside the vehicle are within two feet of the antenna may result
in radio energy radiation burns or related injuries.
2.2.2  Interference with vehicular electronics
Certain vehicle electronic devices may be prone to malfunction due to lack of protection from radio fre-
quency energy present when transmitting.
 It includes, and is not limited to:
 
Electronic fuel injection systems
 
Electronic anti-skid braking systems
 
Electronic cruise control systems
If the installation vehicle contains such equipment, consult the dealer for the make of vehicle and enlist
his aid in determining if such electronic circuits will perform normally when the radio is transmitting.
2.2.3 Secure 
mounting
For vehicle occupant(s) safety, mount G3 securely so that the unit will not break loose in case of an acci-
dent or violent maneuvers.
2.2.4 Explosive 
environments
Operation of vehicular radio transmitters in explosive environments may be hazardous and conventional
safety precautions must prevail. These include and are not limited to:
 
Transmitting while fuelling the vehicle. Do not carry fuel containers in the same compartment as
G3.
 
Dynamite blasting caps may explode when transmitting radio operation takes place within 500
feet. Always obey the “Turn Off Two-Way Radios” signs posted at sites where dynamite is
being used.
If transporting blasting caps:
a)  Carry the blasting caps in an appropriate metal container having a soft cushioning lining.
b)  Suppress transmissions whenever the blasting caps container is being loaded or unloaded into or
from the vehicle.
Check applicable local bylaws.
2.2.5  Installation in vehicles powered by liquefied gas.
G3 installations in vehicles powered by liquefied petroleum gas with the LP-gas container in the trunk or
other sealed-off space within the interior of the vehicle must conform to the National Fire Protection As-
sociation Standard NFPA 58 which requires:
 
Space containing radio equipment shall be isolated by a seal from the space containing the LP-
gas container and its fittings.