Guangzhou Panyu Juda Car Audio Equipment Co. Ltd. 4000592 Manual Do Utilizador
THE PERFORMANCE YOU NEED
®
®
O U T B O U N D S E R I E S
2
2
3
3
4
4
5
5
Charge Your Speaker
Using the USB charging
cable, connect your
speaker’s DC 5V jack to
your PC or a USB charger
(not included).
The charging indicator lights
red during charging and
turns off when charging is
complete.
A full charge takes about
3 hours. When fully charged,
the speaker is capable of
operating for up to 6 hours at medium volume levels.
Using a USB charger with output less than 5V 500mA
can prolong the charging time.
In Bluetooth mode, if the battery power is low, the
speaker will sound “Battery low” to alert you.
Lithium Battery Notes
Follow the instructions for charging the speaker.
Recycle lithium batteries. Do not dispose in the trash.
Do not burn or bury batteries. Do not puncture or
crush. Do not disassemble.
If the electrolyte in the cells gets on your skin,
thoroughly wash with soap and water. If it gets in your
eyes, rinse thoroughly with cool water. Immediately
seek medical attention.
User’s Guide
4000592
Please read this user’s guide before using your new
speaker.
Rugged Portable Speaker
Use Your Speaker
1.
Press and hold the G button to turn on the speaker. A
voice sounds “Power on”.
The Bluetooth indicator flashes red and blue,
indicating the speaker is searching for Bluetooth
devices or trying to reconnect to the previously
connected device.
2.
Activate your device’s Bluetooth function (refer to your
device’s user’s guide) and search for devices.
When OUTBOUND 4000592 appears in the Bluetooth
devices list, pair it to your device. If you are prompted
for a PIN, enter 0000. A voice sounds “You are now
paired, enjoy.”
Package Contents
Rugged Portable Speaker
USB Charging Cable
Carabiner
User’s Guide
Features
No cord to tie you down
Water-resistant
Portable, for outdoor use
Stereo sound with powerful bass performance
Rechargeable battery capable of 6-hour playtime
Compatible with most Bluetooth-enabled devices
n
Caution:
Do not operate the speaker if it has been damaged in
any way.
Do not place heavy objects on top of the speaker.
To avoid electromagnetic interference, do not
place the speaker on top of a TV or other electrical
appliance.
3.
You can control your speaker through your device or
with the speaker’s buttons.
Press § to start/pause playback.
Press + and – to adjust volume.
To reset the speaker, press § twice while the
speaker is searching for Bluetooth devices.
4.
To turn off the speaker, press and hold G again until
you hear “Power off”.
n
Note:
If your device moves too far from the speaker,
the Bluetooth connection may break. The speaker will
reconnect if you move the device close to the speaker
within 15 minutes.
Disconnect Your Device
Press and hold § until you hear “Disconnected”. The
speaker disconnects the current Bluetooth connection and
starts searching for another Bluetooth device.
Device Not Pairing?
Many Bluetooth-enabled devices, such as
speakers, remember the most recently
paired source (music, smartphone, etc.) and
automatically reconnect when turned on.
This is convenient, but can prevent you from
connecting to a new source.
If you can’t pair your speaker, you may need
If you can’t pair your speaker, you may need
to disconnect it from its previous source. See
“Disconnect Your Device” on this page.
Bluetooth Indicator
Charging Indicator
Volume
Control (+/–)
Play/Pause
On/Off
?
4000592_UG_EN_032014.indd 1-5
3/20/2014 3:55:03 PM