Orion Electric Co Ltd F7T765 Manual Do Utilizador
15
INSTRUCTION MANUAL
TROUBLE SHOOTING GUIDE
The video card should be completely
seated in its slot.
seated in its slot.
Power switch and computer power switch should
be in the ON position.
be in the ON position.
The signal cable should be completely connected
to the video card/computer.
to the video card/computer.
Check connector for bent or pushed-in pins.
Power switch should be in the ON position and the
power cord should be connected.
power cord should be connected.
Adjust size and position controls to adjust the
image.
image.
Wait approximately ten seconds after making
adjustments before changing or disconnection the
signal or powering OFF the monitor.
adjustments before changing or disconnection the
signal or powering OFF the monitor.
Signal cable should be completely attached to the
computer.
computer.
Check the pin assignments and signal timmings of
the monitor and your video card.
the monitor and your video card.
Move electrical that may be causing electrical
interference away from the monitor.
interference away from the monitor.
Adjust the side pin-cushion control.
PROBLEM
CHECK THESE ITEMS
No Picture
(Not in power saving mode)
(Not in power saving mode)
LED on the monitor is not lit
Display image is not
centered, too small or
too large
centered, too small or
too large
Display size and position
were not saved
were not saved
Image is scrolling or
unstable
unstable
Picture bounces or a wave
pattern is present in
the picture
pattern is present in
the picture
Edges of the display image
are curved either inward
or outward
are curved either inward
or outward