Ione 4NE993DUSB Manual Do Utilizador
LYNX 99 /3d USB NET MOUSE SPECIFICATIONS
6
Switch Housing
Thermoplastic..
Interconnect Cable
Jacket: Low durometer PVC, 5mm nominal diameter.
Conductor Insulation : PVC
Conductor Insulation : PVC
Standard Connector
USB-A plug
Insulator: Thermoplastic..
Insulator: Thermoplastic..
Contacts: Tin flash plated with a minimum of 15 micro-inches in contact area.
Flex and Strain Relief: PVC.
Flex and Strain Relief: PVC.
Backshell: Molded PVC.
Switch Material and MTBF
Type : Momentary with tactile and audible feedback .
Contact Configuration: SPST.
Pre-travel:0.25-1.3mm.
Hysteresis : 0.04-0.18mm.
Contact Configuration: SPST.
Pre-travel:0.25-1.3mm.
Hysteresis : 0.04-0.18mm.
Contact Bounce: Switch shall have electronically debounced contacts
Actuation Force: 28-115gm.
Actuation Force: 28-115gm.
Electromechanical Life: One million cycles at 3 cycles / second with a vertical
actuation force of 115 gm.
Weight & dimension
Weight
160+20 grams
Dimension 115 x 65 x 32mm (LxWxH)
Dimension 115 x 65 x 32mm (LxWxH)
Cable MTBF Test
Cable Pull Test
Cable shall be permanently secured to mouse housing and connector shell both
shall withstand a 3kg force applied Parallel to cord entry plane for ten (10) seconds
shall withstand a 3kg force applied Parallel to cord entry plane for ten (10) seconds
Cable bending Strength Test
The mouse cable must with stand bending 45 degree any direction from its center
line and be given the following conditions:
1. Load: 100gf
2. Angle: + 45degree.
line and be given the following conditions:
1. Load: 100gf
2. Angle: + 45degree.
3.Cycles: Minimum 1000 cycles
Mechanical Life Test
Mechanical MTBF
160KM at 20cm/sec with vertical pressure of 150gm