B+B SmartWorx WLNG1 Manual Do Utilizador
Maintain the All-in-One
30
Clean the All-in-One
CAUTION:
Unplug the battery from the All-in-One before doing any cleaning procedure.
CAUTION:
Never spray or douse the All-in-One with any liquid. Use only dampened wipes, cloths,
or swabs to clean the All-in-One.
IMPORTANT:
Use only materials from the list below to clean the All-in-One (see "
," below). Other solvents or cleaners may damage the plastic, paint, or the adhesives
used in the All-in-One.
Cleaning materials
The following materials may be used to clean the All-in-One:
Cotton cloths
Cotton swabs
Baby wipes
Deionized water
Eyeglass cleaning wipes (anti-static and anti-fog types only)
Clean outside surfaces
Use a cotton cloth dampened with water to clean the outside surfaces of the All-in-One.
To remove difficult material, such as gummy adhesive or built-up grime, use a cotton cloth
dampened with deionized water or use a baby wipe, and dry with a dry cotton cloth.
dampened with deionized water or use a baby wipe, and dry with a dry cotton cloth.
To clean hard-to-reach places, such as the cooling ribs of the case, use cotton swabs
dampened with deionized water.
dampened with deionized water.
Clean the imager window
Use eyeglass cleaning wipes to clean the imager window. Eyeglass cleaning wipes provide the best
anti-glare cleaning solution.
anti-glare cleaning solution.
○
Be sure to wipe away any build-up from the center area of the imager window.
○
Cotton swabs may be used to lightly remove smudges from the window edges.
NOTE:
If eyeglass cleaning wipes are not available, use a cotton swab dampened with deionized
water to clean the imager window.