Digital Security Controls Ltd. 005501Z32433 Manual Do Utilizador

7

Door Chime on Zone Openings/Closings
You can program each LCD5501Z32-433 keypad to sound a door chime when zones
are opened and/or when they are closed. By default, LCD5501Z32-433 keypads are
programmed to sound door chimes on both zone openings and closings.

To change the door chime opening/closing settings, at each LCD5501Z32-433
keypad:

1. Enter [*][8][Installer’s code]

2. Enter [000] to go to keypad programming

3. Enter section [6].

4. To turn the options on or off, press [6] or [7]:

[6]

ON =

Door Chime Enabled for Zone Openings

OFF = Door Chime Disabled for Zone Openings

[7]

ON =

Door Chime Enabled for Zone Closings

OFF = Door Chime Disabled for Zone Closings

5. When you are finished, press [#] to exit.

Door Chime Sounds
You can program the LCD5501Z32-433 keypad to make different door chime
sounds for individual zones, or groups of zones. Each LCD5501Z32-433
keypad can make any of four door chime sounds for each zone that triggers the
door chime:

· 4 quick beeps (default sound)

· ‘Bing – Bing’ tone

· ‘Ding – Dong’ tone

· ‘Alarm’ tone

NOTE: For a zone to be able to trigger the door chime sound, the Door Chime zone
attribute must also be enabled in the control panel programming. Please see your
control panel Installation Manual.

To change the door chime sounds:

1. Enter [*][8][Installer’s code].

2. Enter [*] to go to door chime sound programming.

3. Enter a 2-digit number for the zone you want to program [01] - [32].

4. Turn one of the following options on by pressing [1], [2], [3], or [4]:

[1]

4 quick beeps (default sound)

[2]

‘Bing – Bing’ tone

[3]

‘Ding – Dong’ tone

[4]

‘Alarm’ tone

NOTE: Make sure that only one of the above options is turned on. If more than one is
on, the keypad will sound the first option that is enabled. If none of the options are
selected, the keypad will not make any sound when the zone is opened or closed.

5. To program the door chime sound for another zone, repeat steps 3 and 4.

6. When you are finished programming the door chime sounds, press [#] to exit.