Digital Security Controls Ltd. 005501Z32433 Manual Do Utilizador

11

NOTE: The Identified Wireless Key Command Output Activation feature is only
available with the PC5010, PC5015, PC5008, PC1555 and PC580 v2.0 and higher.

To enable command output activation by wireless keys, do the following:

• Make sure the control panel is v2.0 or higher
• Program a valid access code for each key

• Enable the PGM output attribute 

 for each PGM output

programmed as [✱][7][1-4] in sections [141] to [154].

To remove a wireless device from the system, follow the guideline for adding a
wireless device. Program the ESN as [000000]. The wireless device for the zone
will be removed.

NOTE: You may need to remove power from the panel in order to clear troubles
caused by deleted zones.

Now that you have enrolled all the wireless devices, you will need to program the
system to work properly with the devices. See section 4 for more information.