Digital Security Controls Ltd. 09LC151 Manual Do Utilizador

Página de 16
 
1 General 
The LC-151 is a unique motion detector utilizing a single passive infra-red element and 
Microwave technology
 
for use outdoors in harsh environments.  
The LC-151 is designed for outdoor use in the most severe and climatic conditions and may also 
accommodate pets with the addition of optional pet immunity lenses. 
High reliability is achieved by combining both dual tech hardware with highly sophisticated 
software, greatly reducing the possibility of false alarms. 
The active elements are comprised of a single element PIR and advanced Microwave detector 
inside a stylish, rigid plastic body.  
These special optics combined with a Microwave Doppler sensor assures elimination of “false 
alarms” while maintaining high security standards for the detection of human intruders into the 
protected area. 
The detection sensitivity and range is controlled by a potentiometer allowing fine tuning, so that 
the correct detection pattern will be set for every installation. 
The LC-151 is designed to protect large areas and can easily be installed on walls in order to 
provide a solid protection of the area while rejects interferences from birds and small animals due 
to the optional “PET MASK” optics. 
2 Features 
•  Microwave detection based on Doppler concept. 
•  N.O. & N.C. relays switched at the same time. 
•  Installation height is calibration free from 1.8m to 2.4m 
•  Pet Immune up to 15kg (33lb) without pet immunity lens or up to 36kg(80lb) when using 
supplied LC-F1-15X pet immunity lens. 
•  PIR sensitivity adjustment. 
•  MW intensity selection. 
• Temperature compensation. 
•  Microcontroller signal processing. 
•  Front and back tamper protection. 
•  Unique waterproof and seal plastic design. 
•  Detection Range: Up to 15m 
•  Detects human intruders walking or running. 
•  No maintenance required. 
• High RFI/EMI Immunity. 
•  Protection from: direct sunlight, wind up to 30 m/sec, snow and rain, small animals, removal of 
top cover and removal from mounting bracket.