Digital Security Controls Ltd. 09LC151 Manual Do Utilizador

 

8 

1. Install the detector in such manner that the intruder is 

most likely to cross the detection area from side to side.

 

2. The detector is to be installed at height of 1.8 to 2.4 

meters (ideally 2.1m) 

 

3. Make sure to attach the metal bracket to a leveled 

straight and firm wall, leaving 10cm from the top and 

10cm from both sides, for easy installation and 

maintenance. 

 

4. Placing the detector on perpendicular wall is 

required for guarding a side window opening. 

Alternately the LC-B1-15X Outdoor Mounting bracket 

can be installed on the same wall, allowing the 

detector beam to be rotated towards the window. 

 

5. Open the detector unwinding the bottom screw. 

 

6. Release the rear metal bracket by unwinding 

internal bottom screw.