Digital Security Controls Ltd. 18LE2077 Manual Do Utilizador

[027] Ethernet 2 Transmission

Default (00)

Program 00 to disable this event transmission or FF to enable. See System Test Options (above)

for details on settings.
[028] Cellular 1 Transmission

Default (FF)

Program 00 to disable this event transmission or FF to enable. See System Test Options (above)

for details on settings.
[029] Cellular 2 Transmission

Default (00)

Program 00 to disable this event transmission or FF to enable. See System Test Options (above)

for details on settings.
NOTE: The time interval (in minutes) between periodic tests is programmed in Section [125]

(Ethernet) and Section [225] (Cellular).

[030] FTC Restore

Default (FF)

Program 00 to disable this event transmission or FF to enable. This event will occur when an

FTC Trouble on the system restores.
[031] Priority Tamper Alarm
Program 00 to disable this event or FF to enable. This event will occur when panel tampered
during the entry delay.

[032] Priority Tamper Restore
Program 00 to disable this event or FF to enable.This event will occur when panel tamper
restored.

[033] Communicator Firmware Update Begin

Default (FF);

Program 00 to disable this event transmission or FF to enable. This event will occur when the
communicator firmware update begins.

[034] Communicator Firmware Update Successful

Default (FF);

Program 00 to disable this event transmission or FF to enable. This event will occur when the
communicator firmware update successfully completed.

[035] Panel Firmware Update Begin

Default (FF);

Program 00 to disable this event transmission or FF to enable. This event will occur when the
panel firmware update begins.

Table 11: Priority Tamper/Tamper Restore

Event

SIA

Identifier

SIA

Reporting

Code

Contact ID

Qualifier

Contact ID

Event

Code

Contact ID

Reporting

Code

Contact

ID User/

Zone

Priority Tamper

000

Priority Tamper

Restore

000