InBody Co. Ltd. BSM170B Manual Do Utilizador
14
4) Unit: Units used for measurement.
a. Use the button to move to ‘Unit’ and then press the button.
a. Use the button to move to ‘Unit’ and then press the button.
b. Use the button to set the unit appropriate for the test environment.
* Unit can be set to be cm or feet and inches.
Unit setup
c. Save changes by pressing the button.
6) After configuring the BSM170/170B, press the button to move to ‘Exit’ and press the
button. BSM170/170B is now ready for use.
button. BSM170/170B is now ready for use.
Offset value setup
5) Offset value: Setting an offset value allows height measurements to be adjusted automatically.
a. Use the button to move to ‘Offset’ and then press the button.
a. Use the button to move to ‘Offset’ and then press the button.
b. Move the measurement unit up or down to set an offset value appropriate for your test environment.
* Offset value can be set up to ±99.9cm.
* To reset the offset value to 0.0, press the button.
* To reset the offset value to 0.0, press the button.
c. Save changes by pressing the button.