ADC Telecommunications Inc. PRSM074C Manual Do Utilizador

© 2009 ADC Telecommunications, Inc

  • Issue 2 • 11/2009

The Remote SERF ENET page is a summary of throughput and number of errors on 
the twelve Ethernet (ENET) ports on the Remote SeRF card. These ports, located on 
the front side of the SeRF card, consist of eight ports used for connection to Remotes 
and four ports used for system management and maintenance functions. 

To open the 

ENET Configurations

 view in the EMS View Frame, in the Function Explorer 

Tree select 

System View

,

Remotes

,

SERF

,

ENET

.

The

ENET Configurations

 view lists the Ethernet ports and their corresponding status.

•

Switch Port

—on card processor's connection to the switch on the SeRF card

•

Craft Port

—on card processor's connection to the PHY port labeled Craft

•

OptEnetPort1-8

—Ethernet switch interface to SFP 1-8

•

Network Port

—Ethernet switch interface to on-card processor

•

Management Port

—switch interface to the PHY port labeled Network

•

Rx Bytes

—Receive byte counter. Increments by the byte count of frames received, 

including those in bad packets, excluding preamble and SFD but including FCS 
bytes

•

Rx  Pkts

—Receive packet counter. Increments for each frame received packet 

(including bad packets, all unicast, broadcast, and multicast packets)

•

Rx FSC Errors

—Receive FCS error counter. Increments for each frame received that 

has an integral 64 to 1518 length and contains a frame check sequence error