Fleetwood Group Inc CRS940-FH Manual Do Utilizador
Fleetwood Group Inc. FCC ID: FBRCRS940-FH IC: 1859A-CRS940H Page 2 of 2
File Name: CRS940_Manual.doc Date: 4/29/2005
File Name: CRS940_Manual.doc Date: 4/29/2005
Operation
1. Instruct the participants on the usage of the response keypads and procedure for
responding.
2. Ask a question and/or send prompts from the base unit for keypad LED display and allow
enough time (at least 10 seconds) for all participants to respond. A self pace testing mode
is also available.
is also available.
3. Observe the results on the screen and optionally save the results for later analysis if
desired.
4. Proceed and repeat the process for the next question.
5. Continue until all questions are completed.
6. Analyze the responses for the period and run printouts if desired.
5. Continue until all questions are completed.
6. Analyze the responses for the period and run printouts if desired.
System Shutdown
1. Turn off the power to the computer.
2. Unplug the USB cable from the computer and store it in its carrying case.
3. Store the CRS940 base in the carrying case.
4. Collect the CRS5200-E/M keypads and return them to the carrying case(s).
5. The system is now ready for transporting.
2. Unplug the USB cable from the computer and store it in its carrying case.
3. Store the CRS940 base in the carrying case.
4. Collect the CRS5200-E/M keypads and return them to the carrying case(s).
5. The system is now ready for transporting.
Notice
The base and keypad units may be susceptible to Electrostatic Discharge (ESD) and
other similar fast transient events causing system interruption. Should system
interruption occur, reboot computer, reset base unit by disconnecting and reconnecting
USB cable and push any key on keypads which have powered down.