Fleetwood Group Inc V240S Manual Do Utilizador
4
1.0 V240S Module
1.1 Description
The V240S is a low power real time locating system sensor. The V240S module is used to identify the location of
an individual or asset location. It communicates at 2.4GHz, to a badge module or a link module, and uses an IR
receiver that receives data from a badge to determine its location.
The overall operation of the V240S module is controlled by a microcontroller. This microcontroller is powered
from an internally regulated supply, and uses a 16 MHz reference. The V240S module can be powered from
batteries, approximately 4.5V, or low voltage DC. The microcontroller handles control of the RF and IR
communications, indicator LEDs, external I/O, and external serial communications.
RF communications use a 2.4 GHz transceiver. The transceiver chip uses a 16 MHz reference oscillator that is
shared with the microcontroller for TX/RX, and is also powered by an internally regulated supply. The transceiver
uses an integral antenna on the PCB.
an individual or asset location. It communicates at 2.4GHz, to a badge module or a link module, and uses an IR
receiver that receives data from a badge to determine its location.
The overall operation of the V240S module is controlled by a microcontroller. This microcontroller is powered
from an internally regulated supply, and uses a 16 MHz reference. The V240S module can be powered from
batteries, approximately 4.5V, or low voltage DC. The microcontroller handles control of the RF and IR
communications, indicator LEDs, external I/O, and external serial communications.
RF communications use a 2.4 GHz transceiver. The transceiver chip uses a 16 MHz reference oscillator that is
shared with the microcontroller for TX/RX, and is also powered by an internally regulated supply. The transceiver
uses an integral antenna on the PCB.
1.2 Battery Replacement
The V240S can be powered from 3, D Cell batteries. The batteries are replaceable. To replace the batteries, open
the case, remove the old batteries, and replace with new batteries noting their polarity.
the case, remove the old batteries, and replace with new batteries noting their polarity.
1.3 FCC and IC
V240S Module
Responsible Party Pertaining to the Declaration of Conformity
Responsible Party Pertaining to the Declaration of Conformity
Fleetwood Group, Inc.
11832 James Street
Holland, MI 49424
Attn: Product Service Coordinator
Phone: 888-467-3759
1.4 Standards and Guidelines
This device complies with the following USA/Canada Regulations:
The USA Federal Communications Commission (FCC) Rules and Regulations
Industry Canada Rules and Regulations
Industry Canada Rules and Regulations
This device complies with the following national and international standards:
FCC Part 15B, 15.249 (10-01-09)
IC RSS-210 Issue 8
IC RSS-210 Issue 8