Buffalo 09101938-0 Manual Do Utilizador
1
2
3
4
5
6
WCR-G300 / WCR-HP-G300 User Manual
8
Chapter 1 Product Overview
Hardware Overview
Front Panel LED's
1
Flexible antenna
Adjust the angle for the best signal as needed. Turning the
unit so that the antenna points straight up will probably give
the strongest signal.
2
Power LED (Green)
On:
The AC adapter is connected
Off:
The AC adapter is not connected
3
Security LED (Amber)
Indicates security status.
Off:
Encryption is not set
On:
Encryption has been set
Double blink:
The unit is waiting for an AOSS or WPS
security key
security key
Blinking: AOSS/WPS error; failed to exchange security keys
Note: When the Security LED is lit, an encryption key has
been set. Wireless clients will need the same key to
connect.
connect.
4
Wireless LED (Green)
Indicates wireless LAN status.
Blinking: Wireless LAN is transmitting
On:
Wireless LAN is connected but not active
5
Router LED (Green)
On:
Router functionality is enabled
Off:
Router functionality is disabled
6
Diag LED (Red)
This indicates the status of the unit depending on the number of
blinks per cycle.
Note: When the unit is first turned on or restarted, the Diag LED will
blink for almost a minute during boot. This is normal.