Buffalo 09102002-0 External Photos
REPORT NO: 06J10094-10
DATE: March 2, 2006
FCC ID: FDI-09102002-0
COMPLIANCE CERTIFICATION SERVICES
Page: 6 of 39
This report shall not be reproduced except in full, without the written approval of CCS.
3 SYSTEM
DESCRIPTION
The DASY4 system for performing compliance tests consists of the following items:
• A standard high precision 6-axis robot (Stäubli RX family) with controller, teach pendant and
software. An arm extension for accommodating the data acquisition electronics (DAE).
• A dosimetric probe, i.e., an isotropic E-field probe optimized and calibrated for usage in tissue
simulating liquid. The probe is equipped with an optical surface detector system.
• A data acquisition electronics (DAE) which performs the signal amplification, signal multiplexing,
AD-conversion, offset measurements, mechanical surface detection, collision detection, etc. The
unit is battery powered with standard or rechargeable batteries. The signal is optically transmitted
to the EOC.
unit is battery powered with standard or rechargeable batteries. The signal is optically transmitted
to the EOC.
• The function of the measurement server is to perform the time critical tasks such as signal
filtering, control of the robot operation and fast movement interrupts.
• A probe alignment unit which improves the (absolute) accuracy of the probe positioning.
• A computer operating Windows 2000 or Windows XP.
• DASY4 software.
• Remote controls with teach pendant and additional circuitry for robot safety such as warning
• A computer operating Windows 2000 or Windows XP.
• DASY4 software.
• Remote controls with teach pendant and additional circuitry for robot safety such as warning
lamps, etc.
• The SAM twin phantom enabling testing left-hand and right-hand usage.
• The device holder for handheld mobile phones.
• Tissue simulating liquid mixed according to the given recipes.
• Validation dipole kits allowing to validate the proper functioning of the system.
• The device holder for handheld mobile phones.
• Tissue simulating liquid mixed according to the given recipes.
• Validation dipole kits allowing to validate the proper functioning of the system.