IKEA of Sweden AB LED1624G9 Manual Do Utilizador

ADD LIGHT SOURCES TO YOUR

STEERING DEVICE:

Before you can use your light source you’ll

need to pair it with a steering device.

To add more light sources, just repeat the

steps below:

1. Make sure that your light source is

installed and the main power switch is

turned on.

2. Hold the steering device close to the

light source you want to add (no more

than 5 cm away).

3. Press and hold the pairing button

for at least 10 seconds. A red light will

shine steadily on the steering device.

Your light source will begin to dim and

finally flash one time to indicate that it

has been successfully paired.

Up to 10 light sources can be paired with 1

steering device.

Make sure to pair them one at a time. If

the light sources are close to each other,

disconnect those that have already been

paired from the main power switch.

CAUTION:

Do not use with wired dimmers. Only

controllable by IKEA Smart lighting

products.

RESET YOUR DEVICE

Toggle the main switch 6 times.

TECHNICAL DATA

Operating frequency: 2405-2480Mhz

Output power: 14 dBm

Manufacturer: IKEA of Sweden AB

Address: Box 702, 343 81 ÄLMHULT

ENGLISH

4