Wulfsberg Electronics Division 2000-800 Manual Do Utilizador

Page 29 of 39 

Publication No. 150-049105 

P-2000 Operators Manual 

Rev. A 

Oct 2003 

Before a transceiver will transmit encrypted messages, the user must load encryption keys into the transceiver.  To 
accomplish this, the user must first put the transceiver into KEY LOAD mode, and then using a Motorola KVL, load 
the keys.  Perform the following steps to load keys: 

•  From the HOME page press the PROG button.  If prompted, enter the password #1 (In the system programming 

options, the user has the option of eliminating this password by setting it to “0000”) 

 

 

 

•  Highlight the KEY LOAD option and press ENTER.   Enter password #2 to get to the Transceiver Setup page. 

 

 

 

•  In the XCVR field, select which transceiver (FM1 or FM2) to load keys. 

•  Highlight the START option and press the enter button to begin the encryption load process. 

•  Connect the KVL loader to the data port on the front of the P-2000 (or RT-2000, not the C-2000).  Load keys 

for both FM1 and FM2 if desired.  The keyloader will indicate successful loading. 

•  Press the HOME button several times to return to the HOME page.