KYE Systems Corp GKZH8 Manual Do Utilizador
ENGLISH
1
Hardware Installation
1. Install two AA batteries in the mouse and two AA batteries in the
keyboard.
2. Plug in the USB receiver to a USB port of your PC.
3. Turn on your PC.
3. Turn on your PC.
Software Installation
You can download the software from
www.geniusnet.com
. Go to Service
& Support and select “Drivers”. In Product Line, select “Keyboard &
Mouse combination”, then go to “Select Model” and select “TwinTouch
600”. Then select the OS you are using. Click on the file name to start the
download. Once you have downloaded the driver to your PC, click on the
file name to start the software installation. Just follow the instructions
shown on the screen to complete the installation.
Mouse combination”, then go to “Select Model” and select “TwinTouch
600”. Then select the OS you are using. Click on the file name to start the
download. Once you have downloaded the driver to your PC, click on the
file name to start the software installation. Just follow the instructions
shown on the screen to complete the installation.
Important Notice
1. Default hotkeys operate immediately when using Windows XP or
above.
2. When the mouse is in sleep mode (power saving mode), press any
button on the mouse to wake it up.
ID Channel Setting
The channel buttons are factory preset. The green LED, the data
transmissions indicator on the receiver will be lit when the keyboard or
mouse is in normal operation. If the keyboard / mouse do not work then
you have to reset the ID channel setting. Please press the connect button
on the receiver first and press the connect buttons under the mouse and
transmissions indicator on the receiver will be lit when the keyboard or
mouse is in normal operation. If the keyboard / mouse do not work then
you have to reset the ID channel setting. Please press the connect button
on the receiver first and press the connect buttons under the mouse and