Biolase Inc. EPIC Manual Do Utilizador

P a g e

                                                                             

5 4 0 0 3 2 1 R e v .   X :   D R A F T

 

 

2. To remove the battery, grip the battery at the top and pull the cable away from the 

connector (Figure 27). 

        

 

 

3. To install the battery, insert the connector wire from the battery to the unit, making sure 

the red wire is on the left, and gently drop the battery into the compartment (Figure 27).  

 

 

4. Replace the battery cover on the bottom of the unit, using a Phillips screwdriver (Figure 

26). 

 

  

5. Connect power cord to power connector on the unit and plug into wall outlet to  charge 

battery (at least 2 hours).  Once the battery is charged, unplug the power cord from the 
wall outlet and the console. 

 

 

6. Dispose of the used battery pack as appropriate for your location. 

The 

 is susceptible to damage if not handled properly. The unit should ALWAYS be 

handled carefully and never banged, jarred, jolted, dropped or knocked. 
Do not transport the unit unless it is completely packaged inside of its shipping box. If you have 
any questions regarding transportation please call your local Representative. 
 

The 

 should be stored in a cool dry place when not in use.  Storage temperature 15°C-

35°C (59°F-95°F), relative humidity 10%-70%, non-condensing.  Cover the unit when not in use 
for extended periods of time. Store the system in a place where it will not be accidentally 
bumped or banged. 

 

 

Make sure the distal end of the Handpiece shaft is protected from dirt with the 
protective tip plug and Handpiece.

 

 

 

Remove battery pack if the Epic 10 is not likely to be used for some time

 

 

The 

 was shipped inside a custom shipping box. Please save and store the box in a 

cool dry place.