Tun Healthcare Limited 66004A Manual Do Utilizador
All the reassurance you need
D66070xx Issue A
Page 3 of 10
Automatic fall detection
• Green light and two "beeps" indicates that
the fall detector has been activated.
• The fall detector will then monitor for
between 6 and 15 seconds to verify if
there could have been a fall. The green
light will flash while it does this.
• If the detector has decided that there is
there could have been a fall. The green
light will flash while it does this.
• If the detector has decided that there is
a fall, then a red light and four "beeps"
indicates that the fall detector is about
to trigger an alarm call (because it has
detected an impact and has not been
upright for between 6 and 15 seconds).
indicates that the fall detector is about
to trigger an alarm call (because it has
detected an impact and has not been
upright for between 6 and 15 seconds).
• If the detector has decided that it was
activated by error then the green
flashing light will stop after between 6 to
15 Seconds and the unit will revert to
normal again.
flashing light will stop after between 6 to
15 Seconds and the unit will revert to
normal again.
• Due to the complex dynamics of falling, all
falls may not be detected. In this unlikely
event the manual button can still be used
to call for help.
event the manual button can still be used
to call for help.