Elster Solutions LLC HHI02 Manual Do Utilizador
TRACE
INTERROGATOR
VRT
(CE)
O
PERATIONS
Trace Interrogator VRT (CE) - User Guide
AMCO Automated Systems P/N 52808T510 Rev. E, April 28, 2006
33
After pressing the “G” key the popup display will open. Enter the
desired transponder number and press <ENTER>. An RF
communications window will open and RF interrogation will start.
The user will be able to watch commands issued and replies
returned from the target transponder. When the interrogation is
completed, the communications commands will be replaced with
read results. Data is NOT added to the database.
desired transponder number and press <ENTER>. An RF
communications window will open and RF interrogation will start.
The user will be able to watch commands issued and replies
returned from the target transponder. When the interrogation is
completed, the communications commands will be replaced with
read results. Data is NOT added to the database.
VersaProbe
Jump to VersaProbe connection
Hot Key: V
This is a jump to the VersaProbe connection screen.
X has no effect.
Click <Ok> to close popup.
This is a jump to the VersaProbe connection screen.
X has no effect.
Click <Ok> to close popup.
VersaProbe Communication Modes
The VersaProbe works only in the Sensus I/O Mode.
Serial Communication Mode
To communicate in serial mode,
Serial Communication Mode
To communicate in serial mode,
1. Connect the lemo end of the lemo cable to the handheld’s lemo
port and the other end to the 6 pin connector of the VersaProbe.