Advanced Input Devices Inc DNNNW Manual Do Utilizador
English
Medigenic Wireless Keyboard
‐
Medical Keyboard Quick Start User Guide
Connect the USB Dongle to any USB port on the computer. The USB driver software will begin to
download automatically to your computer, and the status of this should show in a pop up window from
your status bar in the bottom right portion of your screen. This should take no longer than one minute.
download automatically to your computer, and the status of this should show in a pop up window from
your status bar in the bottom right portion of your screen. This should take no longer than one minute.
The USB Dongle is bound to the keyboard at the factory, so no further action is required by the user for
the two devices to communicate.
the two devices to communicate.
While waiting for this to happen, turn the keyboard over and remove the battery cover located beneath
the wide portion of the elastomeric cover. Remove the brown paper spacer located between the two
batteries, and then replace the battery cover and elastomeric material to its proper place.
the wide portion of the elastomeric cover. Remove the brown paper spacer located between the two
batteries, and then replace the battery cover and elastomeric material to its proper place.
When the batteries are first installed the keyboard will startup in clean mode, which is indicated by a
light in the top left corner by the symbol. This tells you that the batteries are installed properly and
providing enough power to the keyboard, and it also prevents inadvertent keystrokes while the
keyboard is upside down for battery installation. This will turn itself off after a 30 second timer or can
providing enough power to the keyboard, and it also prevents inadvertent keystrokes while the
keyboard is upside down for battery installation. This will turn itself off after a 30 second timer or can
be turned off sooner by pressing the clean mode button under the
icon.
To clean the surface of the keyboard, press the
to turn the keyboard off. The amber light by the
icon will illuminate showing that the keys are disabled and it is now OK to clean the unit. Clean the
keyboard with a hospital approved germicidal spray or wipe. If using a spray, wipe the surface of the
keyboard with a cloth.
keyboard with a hospital approved germicidal spray or wipe. If using a spray, wipe the surface of the
keyboard with a cloth.
Your mouse should also be cleaned at this time.
After cleaning, push the
Icon to turn the keyboard back on, at which time the LED will turn off. If
you forget to restart the keyboard it will do so itself after 30 seconds.
Additional sets of rear mounting feet in different sizes are provided to adjust the height and angle of the
keyboard to match user preference. Simply select the desired set, move the adhesive backing and install
over the existing feet.
keyboard to match user preference. Simply select the desired set, move the adhesive backing and install
over the existing feet.