Visonic Inc. PWRMCOMPLETE Manual Do Utilizador
SPECIAL FUNCTIONS
D-300886
19
If a person under surveillance in the Watkins
residence has been inactive, the message will be:
residence has been inactive, the message will be:
[The Watkins Residence - No Activity].
The called party must acknowledge the message (as
explained later on), but if he does not respond, the
message will be transmitted repeatedly as many
times as possible within a 45-second time limit.
When the 45 seconds are up, the
PowerMaxComplete will disengage the line and call
the next private telephone number on its list.
explained later on), but if he does not respond, the
message will be transmitted repeatedly as many
times as possible within a 45-second time limit.
When the 45 seconds are up, the
PowerMaxComplete will disengage the line and call
the next private telephone number on its list.
The called party can acknowledge the message by
pressing a key on the telephone keypad, as follows.
pressing a key on the telephone keypad, as follows.
Command Key
Acknowledge only: The
PowerMaxComplete disengages the
line and considers the event duly
reported.
PowerMaxComplete disengages the
line and considers the event duly
reported.
2
Acknowledge and listen-in: The protected
site is “bugged” for sound for 50 seconds.
The called party may prolong the listening
session by pressing [3] again before the
PowerMaxComplete disengages the line,
or by pressing [1] to speak.
site is “bugged” for sound for 50 seconds.
The called party may prolong the listening
session by pressing [3] again before the
PowerMaxComplete disengages the line,
or by pressing [1] to speak.
3
Acknowledge and speak out: The
called party may speak for 50 seconds
to whoever is in the protected site. The
called party may prolong the “speak
out” session by pressing [1] again
before the PowerMaxComplete
called party may speak for 50 seconds
to whoever is in the protected site. The
called party may prolong the “speak
out” session by pressing [1] again
before the PowerMaxComplete
disengages the line, or by pressing [3]
to listen.
to listen.
1
Acknowledge and 2-way conversation:
You and the called party can speak and
listen without any necessity to switch the
system from "listen-in" to "speak-out"
You and the called party can speak and
listen without any necessity to switch the
system from "listen-in" to "speak-out"
and
vice
versa for 50 sec. (extendable).
6
Acknowledge and request a status
report: The PowerMaxComplete will
issue a verbal report of system status.
For example:
report: The PowerMaxComplete will
issue a verbal report of system status.
For example:
[Disarm - ready to arm] or
[Disarm - back door open] or
[Disarm - alarm in memory].
9
Remote Control
Remote Control
Remote Control
Remote Control by SMS
by SMS
by SMS
by SMS
PowerMaxComplete system with an optional
internal/external GSM unit can respond to SMS
commands from any cellular GSM telephone, only if
the “REM ACCESS ON” command was pre-selected
by the system installer.
internal/external GSM unit can respond to SMS
commands from any cellular GSM telephone, only if
the “REM ACCESS ON” command was pre-selected
by the system installer.
The various SMS commands are detailed in the
following table (the detailed SMS message sending
process is described in the cellular telephone user’s
guide). In this table, “<code>” means 4-digit user
code and blank space simply means blank space.
following table (the detailed SMS message sending
process is described in the cellular telephone user’s
guide). In this table, “<code>” means 4-digit user
code and blank space simply means blank space.
SMS Command List
Command SMS
Format
1
Arm AWAY
“AWAY <code>”
or “AW <code>”
or “AW <code>”
2
Arm AWAY instant “AWAY INST <code>”
or “AWI <code>”
3 Arm
AWAY
Latchkey
“LATCHKEY <code>”
or “LK <code>”
or “LK <code>”
4 Arm
AWAY
Latchkey instant
“LATCHKEY INST
<code>”
or “LKI <code>”
<code>”
or “LKI <code>”
5
Arm HOME
“HOME <code>”
or “HM <code>”
or “HM <code>”
6
Arm HOME instant “HOME INST <code>”
or “HMI <code>”
7
Disarm
“DISARM <code>” or “DA
<code>”
<code>”
8
Turn PGM on
“PGM ON <code>”
9
Turn PGM off
“PGM OFF <code>”
10 Define custom
house identity (see
note)
note)
“HOUSE NAME <code>
<house ID>”
<house ID>”
or “HN <code> <house
ID>”
ID>”
11 Query system
status
“STATUS <code>” or “ST
<code>”
<code>”
Note: House ID includes up to 16 characters, for
example JOHN'S HOUSE.
example JOHN'S HOUSE.
Reporting by SMS
Reporting by SMS
Reporting by SMS
Reporting by SMS
This option is applicable only if the GSM Module is
installed. The PowerMaxComplete system can send
SMS messages to a registered SMS telephones (up
to 4). (The SMS telephone registration is preselected
by the system installer).
installed. The PowerMaxComplete system can send
SMS messages to a registered SMS telephones (up
to 4). (The SMS telephone registration is preselected
by the system installer).
The reported SMS messages are quite clear and
self-explanatory and therefore are not detailed in this
guide.
self-explanatory and therefore are not detailed in this
guide.
Example of the reported SMS messages:
•
JOHN’S HOME
**AWAY**
**AWAY**
•
JOHN’S HOME
**DISARM**
**DISARM**
•
JOHN’S HOUSE
POWERMAX: LOW BATTERY
GARAGE: LOW BATTERY
POWERMAX: LOW BATTERY
GARAGE: LOW BATTERY
•
JOHN’S HOUSE
STATUS MESSAGE 01
(Event list is displayed)
STATUS MESSAGE 01
(Event list is displayed)
Note
Status messages can be sent only to a calling
telephone whose identity number is not blocked by
the user!
Status messages can be sent only to a calling
telephone whose identity number is not blocked by
the user!